Model #23355214000 KENMORE Range Hood

  • Range Hood
    3 Results
Find part by diagram >

Question and Answers


how do I change my control board on range hood #233.55214000 ?


It is important to have the correct instructions when installing a control board. An expert will be able to respond shortly with information specific to your model. It usually takes 24-48 hours to receive a response. Below I have attached a link from the Sears Home Services website in case you want to schedule service.

Read More
Jackie S -
March 18, 2012

Thank you for your question on changing the control board.

First remove power to the range hood.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Then remove the filter or filters.

Remove the light bulbs.

Then remove the two screws that the filter exposes for the back side of the light panel.

Then remove the three for the front of the light panel.

This will expose a black plastic air baffle, and remove it

Then with a thin bladed knife get under the overlay on the front control panel and remove by peeling it off. (You get a new one with the control) This will expose three screws that secure the control to the housing.

The control will drop down when the screws are removed.

Remove the wires and place onto the new control. Re-install into the housing with the three screws and mount the new overlay on the front of the panel.

Replace the air baffle and the light panel. Return the light bulbs and filter and restore power.

I hope this was helpful.

Sam A.

Read More
Sam A -
Sears Technician
March 19, 2012
See more answers

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show