Model #22-84092 Kenmore microwave built-in trim kits/components

  • Trim Kit
    3 Results

Question and Answers

Q:

Getting fault Pf then E95 on dryer model 84092/94092. Can you tell me what these mean and what is the cause?

A:

The error codes that you are seeing indicate that the control board detects a problem with the power supply voltage.

The Pf indicates that the board detected a power failure. The E95 error code indicates that the board detected low voltage.

If you have a gas dryer, check the outlet to make sure that it is working properly. Plug a small lamp or appliance into the outlet to see if it works.

You can unplug the dryer and check the red wire that is connected to the heater relay on the control board. That wire is highlighted on the wiring diagram in the first image below. The second image shows the basic procedure for accessing the control board in this type of dryer. If the connection of the red wire is loose, it can cause this problem.

If you find no problems with the red wire, then the control board will likely need to be replaced.

I recommend that you have a service technician verify this failure and replace the control board. Here is a link for the Sears Service website: Sears Home Services .

If you need more help, reply with additional details and we will try to assist you further.

Read More
Lyle W -
Sears Technician
October 26, 2010
Q:

22 in high wheeled trimmer

A:

Thank you for your question on the high wheeled trimmer not running.

It sounds like you are having a fuel problem and it may be that the float is not set correctly or the needle valve is sticking and not letting enough fuel into the carburetor bowl.

If you can make it run by pushing the primer bulb I am concerned that the pick up tube orifice in the bottom of the carburetor stem is plugged. Please look at this please and then while you are in the carburetor you can check the action of the flow and needle valve.

Please let me know what you find out.

Sam A.

Read More
Sam A -
Sears Technician
June 29, 2012
Q:

What is the weight of a Kenmore Galaxy 22' refrigerator?

A:

I don't have a weight specification available on this refrigerator. Most refrigerators of this size would weight about 200 pounds. I anticipate that your refrigerator will weigh about that much.

I did not find information on the exact model number 10655122600. I suspect that the model number is actually 1065512700. The size specifications for this model are shown in the image below.

You can find the owner's manual online at our Manage My Home website. On the home page, hold your mouse over the square labeled "HOME" in the upper left of the page and choose the option "Products and manuals" from the drop-down menu that appears.

Then enter the following information in the search fields:

Type of Product: Refrigerator

Brand: GALAXY (NOTE: Use this brand name.)

Model no.: 10655122700

If you have any trouble accessing the manual, please call the Manage My Home Member Services Team at 1-800-803-6775, between 8 a.m. and 8 p.m. Central Time. They will be more than happy to help you track down the manual.

I also included a link below for your owner's manual.

Read More
Lyle W -
Sears Technician
July 10, 2008