Model #220707 (0140-01 - 0140-01) Briggs & Stratton engine

  • Cylinder, Crankshaft & Engine Base Group
    3 Results
  • Air Cleaner & Carburetor
    3 Results
  • Starter Motor
    3 Results

Question and Answers

Q:

Briggs&Stratton 5 HP, model 135212, Type 0140 01

A:

Thank you for your question.

I have checked the model number you have submitted. Your engine does not have points. I recommend checking the air gap setting first. It should be set at 0.012 if it is off there will not be any spark. Once the air gap is set, remove the kill wire and check for spark. If there is spark reconnect the kill wire and check again. If there is no spark, the kill circuit is shorted. If you never get spark the magneto defective. There is a sight possibility the magnet on the flywheel has lost its magnetism but it is not likely. I hope this is helpful.

Here is a link to order any parts you need. Sears Parts Direct .

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 24, 2011
Q:

What does error code 01 indicate on my HE3?

A:

With out the model number or description of the product I do not know if you are referring to your HE3 washer or HE3 dryer. Based on the Dryer listed in your home profile the 01 code is not listed. The error codes on the dryer will display as "E1, E2, and E3"

There are no error codes 01 for the HE3 dryers or HE3 washers.

The 01 is not an error code.

Resubmit your question with the model number and details for specific information.

Read More
Joey S -
Sears Technician
April 11, 2008
Q:

LG Model #LDS5811ST/01

A:

Check the child lock function to make sure that function is not enabled as shown in the first image below. You did not indicate the error code that you are seeing on the dishwasher. The second and third images show the error codes for this type of dishwasher. If you see one of these error codes, you may be able to perform some of the troubleshooting shown in those images. Be sure that you shut off the circuit breaker for the dishwasher to completely disconnect electrical power before accessing internal components. If you need more help, reply with additional details (error code being displayed) and we will try to assist you further.

Read More
Lyle W -
Sears Technician
March 07, 2011