Model #2070 Bissell power steamer

  • Quicksteamer
    3 Results

Question and Answers


change belt/manual


Thank you for your question.

  • To install a replacement belt.

  • Make sure cleaner is unplugged from wall outlet.

  • Remove water and recovery tank from unit.

  • Turn unit up side down and locate the floating roller brush end caps and roller bearings and remove the two screws that secure them to the base assembly. Remove belt end brush cover from around brush. With the brush belt inspection cover removed, locate the motor pulley and wrap belt around the pulley and extend belt forward and install around roller brush. Re-install the brush end caps and brush cover, reinstall screws. The roller brush sort of floats in the base assembly.

  • I am sorry that there is not a repair manual published for this model.

  • If you have the cleaner more apart than described above please give more information as to what you want to re-install.

If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations: Sears Home Services .

Read More
Sam A -
Sears Technician
August 10, 2010