Model #180-D Citizen computer/printer

  • Drawing No. 1 General Assembly (180d)
    3 Results
  • Drawing No. 2 Mechansim Unit (180d)
    3 Results
  • Drawing No. 4 Tractor Unit (180d)
    3 Results

Question and Answers

Q:

I own a 2006 sears craftsman lawn tractor 42" 18.5 hp model no. 917.275642. It will not start without advancing the fly wheel 180 d (the wire cage on top of

A:

Thank you for your question.

I am sorry you are having a problem with the tractor. Based on what you have to do to start the engine I suspect the valves are out of adjustment. When they are not adjusted correctly, the compression release will not work. If the compression release does not work the starter does not have enough power to overcome the compression. To repair this, the valves need to be adjusted. I found a video that show how to adjust the valves. Click here to watch the video.



I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life. Mark

Read More
Mark T -
Sears Technician
October 31, 2012
Q:

d

A:

Thank you for your question.

I see that you have attempted to ask a question on the Manage my life website. We did not receive and question or details. If you could please reply to this thread with the question and details, I will be happy to assist you.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
August 22, 2011
Q:

Kenmore Ultra Soft 180

A:

Thank you for your question on the water softener continuing to run.

Can you hear water running and water coming out of one of the drain lines?

Or do you hear the motor rotating the machine constantly through its cycles?

I would first suggest that you remove power to the water softener by removing the plug.

Then remove the top cover and examine the wire harnesses for making sure all wire connections and plugs are tight.

Then plug the unit back in and reset the time of day and set the hardness level.

Are there any error codes that are on the display?

Please let me know what you find out and we can continue to troubleshoot with that information.

I will also give you a web site link to Kenmore water.com.

This is an interactive troubleshooting site for helping you diagnosis you water softener.

Kenmore water troubleshooting .

I hope this will help also.

Sam A.

Read More
Sam A -
Sears Technician
September 22, 2012
A:

Thank you for the update Travis. The manually initiated electronics diagnostics is activated by pushing the SELECT button until 000 shows in the display. If there shows an Err with a number from 1 - 5. Check the image below for some help with diagnostics. Please follow the instruction on the page and let me know what you find out. Check the blue link from the previous thread for the on line troubleshooting guide. Sam A.

Read More
Sam A -
Sears Technician
September 24, 2012
See more answers