Model #17-3RP-7-SP Mcclane reel mower

  • Replacement Parts
    3 Results

Question and Answers

Q:

Where can I find the serial no. for my Craftsman weedwacker 17"/25cc? It is 7+ years old.

A:

The model and serial number are on a tag that is attached to the housing of the trimmer that covers the engine. You might need to clean the trimmer housing to find the tag. The tag is made of a durable material and won't wash off when you clean it.

Read More
Jimmy K -
Sears Technician
July 30, 2009
Q:

What does the code SP indicate on the front loading HE2 washer?

A:

I don't find information regarding the SP code on this type of washer. There is an SD code that indicates a suds lock or oversudsing condition. This could be caused by using too much detergent or not using HE (High Efficiency) detergent. Usually, the washer will drain properly after the suds dissipates. Use a Drain/Spin cycle to drain and spin the washer.

This code can sometimes be displayed when you have a clogged drain or an obstruction in the drain pump. Make sure that your drain hose is not kinked or clogged. If you suspect that the drain pump is clogged, you can follow the tips in the link of a previous answer: Why am I getting error codes SD and F21 on my Kenmore HE2+ washer?

If you need more help, resubmit your question with additional details and the full model number of your HE2 washer.

Read More
Lyle W -
Sears Technician
Q:

trouble with skill saw ???!!!!!!!!!!!

A:

Thank you for your question.

I can understand wanting to change the blade on the skill saw.

Most of the saw have a lock button or lever to hold the armature while you tighten the nut.

Without the model number of the saw I can only give you some general information.

Please reply with the model number and I can look at the information and give you a more specific answer.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
July 05, 2011