Model #1631 (1995) BISSELL Power Steamer

  • Power Steamer
    3 Results
Find part by diagram >

Question and Answers

Q:

Why did our 1995 built-in microwave stop working?

A:

Several different internal component problems could prevent your microwave from heating. You could have a failed magnetron, a blown fuse, a switch problem or a failed control board. Internal components of the microwave must be repaired only by a service technician. Internal capacitors can retain an electrical charge even when electrical power is completely disconnected from the unit. A microwave radiation leakage check must be performed using proper testing equipment following any internal microwave repair. I recommend calling a service technician to diagnose and repair your microwave.

Read More
Lyle W -
Sears Technician
Q:

Is it worth trying to repair a 1995 Kenmore oven?

A:

Thank you for your question.

I can certainly understand wanting to save money if it is something simple to repair.

It sounds like you control board has failed and it will be more annoying than dangerous with making that sound. You may want to turn the circuit breaker off and the fuse box for the wall oven for at least one minute and then turn it back on to see if the control will reset.

If it does not then turn the breaker off to not have the buzzing sound.

To replace the control the part number is: WB27K5140 and it sells for about $215.00 plus shipping.

If you decide to change the clock it is not very difficult but you may want to invest the $200.00 + into a new wall oven.

If you have a technician do the repair you will have about $365.00 into the range.

If you decide to replace the control we can give you enough instructions if you feel comfortable pulling the oven out of the cabinet and working with the wiring.

Wall oven option .

Please reply if you decide to repair the oven and we will be happy to help you with the repair.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
June 20, 2011
Q:

need a repair manual for 1995 kenmore clothes dryer 110.96589410

A:

I provided a wiring diagram for your dryer in the first image below. The second image shows how to access the drive motor in this dryer.

Be sure that you unplug the dryer before accessing internal components.

The information shown in that link for a previous answer provides tips on checking the drive motor on a similar dryer. This information may help you with this dryer failure. If the motor is okay, you could have a bad door switch, a broken drive belt, a blown thermal fuse, a bad start switch, a timer failure or a wiring problem in the circuit.

Reply with additional details if you need more help with this repair.

You can order parts from the Sears PartsDirect website.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
June 16, 2011