Model #15639 Lifestyler misc exercise

  • Frame Assembly
    3 Results
  • Base Assembly
    3 Results
  • Carriage Assembly
    3 Results
  • Bench Assembly
    3 Results
  • Leg Lift
    3 Results
  • Leg Brace (with Pulley/cable Assembly)
    3 Results
  • Handlebar Assembly, Lat Bar, Short Pulley Bar
    3 Results

Question and Answers

Q:

Kenmore Dishwasher turned on for almost a minute then lost all power. After replacing thermal fuse there was no change in power. The door latch closes too.

A:

Hi Daryl,

Thank you for submitting a question to Manage My Life.

Line voltage must pass through the L1 side door switch and the thermal fuse to reach the control board. Neutral must pass through the neutral side door switch. The diagnosis of this issue will require the use of a multi meter. If you have a meter and are confident in your technical abilities please utilize the checks below. Note: You must replace the fuse kit in its entirety. The fuse kit comes with the things pictured below.

The first thing you need to check is incoming voltage at the terminal block. This is behind the toe panel where voltage is supplied to the dishwasher. Working with live electrical current can be very hazardous and possibly deadly. Testing voltage output requires working with electrical current. Do not attempt this measurement without the proper tools and safeguards. If you are not sure you can make these checks safely, please refer this work to a service tech.

If you have voltage to the terminal block, the next thing you will need to check is the thermal fuse and door switches. Here is a video that demonstrates checking a thermal fuse with a meter; Video . Or, you can check the voltage at the control going into the thermal fuse. I recommend making continuity checks first. You can check the door switches for continuity with the door switches made. Be sure and turn off electrical service to the dishwasher at the breaker box before checking continuity.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website; Sears Home Services .

Here is a link that you may use to view the parts list diagram or to purchase any parts needed for your Kenmore model number 665.15639000 dishwasher .

I hope this is helpful. Check the things I have covered here and if I may be of further assistance please reply to this post.

Landell

Read More
Landell -
Sears Technician
April 06, 2012