Model #153327565 KENMORE Water heater, Electric

  • Electric Water Heater
    3 Results
Find part by diagram >

Question and Answers


Extremely hot water 153327565 Kenmore Electric water heater


Hello glad to help.  Thank You for choosing Sears
I am sorry and do understand your frustration when there is trouble with the water heater. 
Glad to help out.   Im  looking at your Kenmore Electric water Heater model number 153.327565.

Most likely either your upper or lower heating elements have gone bad.  However, your thermostat could be stuck open.

Some helpful ideas to check:

1.  Verify the water heater is plugged in.  Reset the circuit breaker.

2.  Turn  off the power to the water heater and open the front acess panel.  Fold back the insulation and locate the red "reset" button.  Replace the insulation and close the access panel.  Restore power.

3.  Turn the thermostat down if the water is too hot.  Allow at least 1 hour for the temperature to adjust prior to using any water.

4.  If thermostat is working then you know to change the heating elements.

If you change the heating elements, be sure to also change the heating element gaskets.

Heating element for water heater 153.327565

Element  gasket  for water heater 153.327565

If you have further questions please let me know.
Thanks for choosing Sears

Read More
Larry L -
Sears Technician
February 06, 2014

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show