Model #153326160 Kenmore water heater, electric

  • Electric Water Heater
    3 Results

Question and Answers

Q:

Location of anode rod on Kenmore water heater model 153326160

A:

Thank you for your question on the anode rod for the water heater.

What you are describing is the cover over the hex nut for the anode rod. It will be on the top back behind the outlet for the hot and cold water lines.

If you want to inspect it you will need to turn both the hot and cold water supply to the water heater and the release the pressure by letting a little water out of the drain cock. Then with the correct size socket you can unthread the anode rod from the water heater for inspection. Make sure you put some pipe thread or Teflon tape back on the threads before re-installing the rod.

If you need to replace the anode rod this is the part number. 9004257.

Anode rod .

I hope this will help.

Sam A.

Read More
Sam A -
Sears Technician
January 13, 2012
A:

I am sorry it will be the one that is closest to the center of the water heater not quite between the two water lines not the one on the outer edge.. Sam A.

Read More
Sam A -
Sears Technician
January 13, 2012
See more answers

Recommended maintenance parts & accessories

Show 3 more
No more item to show