Model #153320692HT KENMORE Water heater, Electric

  • Water Heater
    3 Results
Find part by diagram >

Question and Answers


my water heater is electric and the water gets real hot and then cold,the reset button in the thermostat trips out and I reset it again and it works,


I am sorry that you are having some difficulties with your water heater and I will be happy to help. I did some research and I was able to find a link that will provide you with some good information. I am also adding as second link in where you can set service to have your water heater repaired by a certified technician. I hope this helps with your water heater troubles while you wait for your expert response.

Read More
Joseph P. -
November 15, 2012

Thank you for your question. I know it's frustrating when the water heater stops working. The information you have received is correct. If it works ok for a while after being reset, the thermostat will need to be replaced. I always found it works better to replace both thermostats at the same time. The upper thermostat is # 31911 and the lower thermostat is # 9002214. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
November 17, 2012
See more answers

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show