Model #144-998-401 MTD lawn, tractor

  • Garden Tractor
    3 Results
  • Hydrostatic Tractor
    3 Results
  • Hydrostatic Tractor Page 2
    3 Results
  • Hydrostatic Tractor Page 3
    3 Results
  • Model 998 Hydrostatic Tractor
    3 Results
  • Hydrostatic Tractor
    3 Results
  • Hydrostatic Tractor Page 2
    3 Results
  • Hydrostatic Tractor Page 3
    3 Results
  • Hydrostatic Tractor Page 4
    3 Results
  • Hydrostatic Tractor Page 5
    3 Results
  • Hydrostatic Tractor Page 6
    3 Results
  • Transaxle
    3 Results
  • Transaxle Page 2
    3 Results
  • Hydrostatic Transmission
    3 Results
  • Three Point Hitch
    3 Results
  • Electrical System
    3 Results
  • Refer To Image For Details
    3 Results
  • Refer To Image For Details Page 2
    3 Results
  • Refer To Image For Details Page 3
    3 Results

Question and Answers

Q:

please provide instructions on how to replace the door handle on a microwave. The plastic piece that encases the screw that attaches to the door cracked.

A:

   Thank you for your question.  Replacing a door handle on most appliances is no big deal but a microwave is not the usual appliance. Replacing the door handle is a repair that should only be completed by a service technician. Disassembling the door would involve removing the microwave shielding components. A technician will need to remove these parts, replace the handle, and then reassemble the door. A microwave radiation leakage test must be performed on the door using proper testing equipment before the microwave can be safely returned to service.  

I recommend calling a service technician to install the door handle. You can have it repaired at your home by a  Sears technician.  Here is a link for the website: Sears Home Services 

  Thank you for using Manage my life.  Mark T.

Read More
Mark T -
Sears Technician
March 10, 2013
Q:

kenmore elite model no. 110.45087 401 machine

A:

Hi Jennifer,

Thank you for submitting a question to Manage My Life.

There are four bolts that came with your washer when it was purchased. Usually you can open the door to the washer and push the basket around until the holes line up. If needed you can remove the top so you can see the holes and line them up as you install the bolts.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thanks again for using Manage My Life.

Landell

Read More
Landell -
Sears Technician
August 08, 2011
Q:

Dishwasher Kenmore does not drain. Model 587 144 322 00

A:

Hello,

Thank you for submitting a question to Manage My Life. I know how frustrating it can be when appliances do not function properly.

From your description the drain impeller may be damaged. It is fairly common for them to strip out and then spin on the motor shaft. You can replace the impeller, but you will have to disassemble the sump/motor assembly. I have included a set of illustrated instructions below.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Here is a link that you may use to view the parts list diagram and for parts purchases; Sears Parts Direct .

I hope this is helpful. Check the things I have covered here, and if I may be of further assistance as more details become available, please reply to this post.

Thanks again for using Manage My Life.

Landell

Read More
Landell -
Sears Technician
August 29, 2011