Model #13AT609G766-2003 Troybilt lawn, tractor

  • Hood Section
    3 Results
  • Seat Section
    3 Results
  • Steering Section
    3 Results
  • Transmission Section
    3 Results
  • Transaxle
    3 Results
  • Battery And Pulleys
    3 Results
  • Engine Section - T609
    3 Results
  • Engine Section - J609
    3 Results
  • Mower Deck
    3 Results
  • Diagram Models J609 And T609
    3 Results

Question and Answers

Q:

MAYTAG DRYER - Installed 2003.

A:

You could have a shorted heating element if it is an electric dryer. A stuck operating thermostat would also prevent that type of dryer from heating properly. If you need help with troubleshooting this failure, reply with additional details and the full model number of your Maytag dryer.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
August 12, 2011
Q:

craftsman 2003 lt1000 mower will not engage

A:

Thank you for your question.

It sounds like you have a problem with the idler arm on the mower deck. When the engagement lever is lifted, the idler arm should move. This releases the blade brakes and tightens the belt. We have one style 42 inch deck that has had this problem. There is a kit that will cure this problem. However, I would need a model number to make sure, if the kit will work on your tractor. Please reply with a model number and I will check our information.

Thank you for using Manage my life. Mark T.

Read More
Mark T -
Sears Technician
March 04, 2012
Q:

Where can I get the instructions for the LP conversion kit PCK 2003?

A:

I added the specific instructions in the image below for the PCK 2003 LP conversion kit. Without knowing the specific model number of your dryer I will not be able to provide any specific instructions on how to access the burner assembly. You will need to remove the lower access panel if it has one. If it does not have a lower access then the front panel must be removed.

Resubmit your question with the model number of your dryer if you need specific instructions on how to access the burner assembly.

Read More
Joey S -
Sears Technician
March 29, 2010