Model #13953990D CRAFTSMAN garage door opener

  • Installation Parts
    3 Results
  • Rail Assembly
    3 Results
  • Motor Unit Assembly
    3 Results
  • Accessories And Warranty
    3 Results

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

What are the instructions to program the remote on a Craftsman garage door opener model 13953990D?

A:

The programming instructions for the remotes are provided in the image below.

Here is a link for the full owner's manual for this model of Craftsman garage door opener: Owner's Manual

If you need more help, resubmit your question with additional details.

Read More
Lyle W -
Sears Technician
March 23, 2009
Q:

What is the voltage to the motion detection control 2C472-1 for a Garage door opener model 13953990D?

A:

The voltage to the wall control is 4-5 volts dc. This is the same amount of voltage that goes to the door sensors if you ever have a problem there.

If you can touch the two wires together and the door operates, replace the wall control.

Read More
Jimmy K -
Sears Technician
April 20, 2009
Q:

Craftsman Garage door opener

A:

Thank you for your question on changing the code for the handheld remotes.

Pricilla V. gave you a link to a previous answer by Lyle W. that should solve you problem.

All you have to do is push and hold the learn button on the back of the motor unit logic board until the little l.e.d. light goes out and then hold the button down on the remote you still have and push but do not hold the learn and the work light on the opener should flash on time to show it has excepted your only remote.

Hopefully the other remote is not close by with its button pushed or it will program also.

You can purchase a second remote either on line or at your nearest Sears Store. Look on the back of the remote you still have to get the part number for another remote.

I hope this will help.

Sam A.

Read More
Sam A -
Sears Technician
February 20, 2012

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show