Model #13953964SRT Craftsman garage door opener

  • Carton Inventory/art No Parts
    3 Results
  • Rail Assembly
    3 Results
  • Installation
    3 Results
  • Opener Assembly
    3 Results
  • Front Cover-assy.,installation
    3 Results
  • Front Cover-assy.,installation
    3 Results
  • Front Cover-assy.,installation
    3 Results
  • Back Cover-assy.,installation
    3 Results
  • Back Cover-assy.,installation
    3 Results
  • Back Cover-assy.,installation
    3 Results
  • Front Cover-assy.,installation
    3 Results
  • Front Cover-assy.,installation
    3 Results
  • Front Cover-assy.,installation
    3 Results
  • Back Cover-assy.,installation
    3 Results
  • Back Cover-assy.,installation
    3 Results
  • Back Cover-assy.,installation
    3 Results
  • Parts
    3 Results
  • Parts
    3 Results

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Sears garage door opener 13953964srt

A:

Thank you for your question.

I can understand wondering why the wall control will no longer operate the work light, but the light works when the door is operated.

Is the lock light flashing or is the lighted push button flashing?

If the lock light was activated you would not be able to use the remotes but the keyless touch pad would work. If it is the light that is flashing push and hold for 2 to 10 seconds to see if it will go out.

I can only think that the wall control light feature has failed and will need to be replaced. I do not think that the logic board in the motor unit has a problem but it is possible.

Please reply with which light is flashing on the wall control.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
July 06, 2011
A:

Thank you for the update. I would say that the wall control must have gone bad and this can happen it the screws that mount it to the wall are screwed it too tight. The only other thing it could be is the logic board for those circuits. I would suggest getting a new premium wall control 53687 first. Check the link below for the wall control.

Read More
Sam A -
Sears Technician
July 06, 2011
See more answers
Q:

Can you help with programming a garage remote?

A:

I am sending you an image of the instructions for programming a remote to your opener.

Read More
Jimmy K -
Sears Technician
May 28, 2009
Q:

Keypad for Craftsman Garage Opener Model 13953964SRT does not light up

A:

The keypad for that model of Craftsman garage door opener is 53684. Here is a Sears.com link for that keypad: Craftsman Keyless Entry Pad Security+

You should also be able to find that keypad for available in your local Sears Store.

The second link that Barbara H. provided in the above response is for the owner's manual on this garage door opener. You may need that manual in case you don't have your original one.

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
May 02, 2011

Recommended maintenance parts & accessories

Show 3 more
No more item to show