Model #137229200 Craftsman drill press

  • 20" Drill Press
    3 Results

Question and Answers

Q:

Will The Arbor fit the chuck???

A:

Thank you for the question on the drill chuck not fitting the arbor.

Is the old arbor still in the old drill chuck?

This is the correct chuck for this drill press and the arbor is also correct key you gave.

These parts are all tapered swedge fit parts.

You will need that arbor for the chuck to fit onto and then install the arbor onto the spindle of the drill press.

The manufacture of the drill press is Rexon and they have a Craftsman tool help line by calling 1-800-843-1682. Have you model and serial number handy for when they come on the line.

If this is not the case then please let me know and we can continue to troubleshoot.

Please let me know how it goes.

Sam A.

Read More
Sam A -
Sears Technician
December 29, 2011
A:

Thank you for bringing this to our attention. We definitely want to send out the correct parts. I will investigate the parts with the vendor and the parts house to see where the problem is. I will start with the tool vendor to get the specs for the arbor and chuck and then have the parts source check there stock to see if there have the wrong parts in the bin. Again thank you heads up. I will get this solved. Sam A.

Read More
Sam A -
Sears Technician
January 03, 2012
See more answers