Model #13181332-S CRAFTSMAN Walk Behind Lawnmower, Gas

  • Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

kenmore s/s fridge

A:

I don't have an illustrated procedure or video that replacement of that cold control thermostat in your Kenmore refrigerator. The parts diagram of the control section is shown in the image below. You will need to rely on that parts diagram and your personal observation of the control area to determine how to complete this repair. Unplug the refrigerator to disconnect electrical power before beginning this repair. Safely store the food if necessary. You can look for screws under that control housing that will release it so that it can drop down. Once you release that control housing, you should be able to remove the wiring from the old cold control thermostat and pull it out. Observe how the sensor is positioned as you pull the old thermostat out. You will need to route that sensor for the new thermostat in the same manner.

I hope that this information helps. If you need more assistance, reply with additional details.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
December 12, 2011
Q:

model#'s

A:

Thank you for your question.

I can understand that different sites can be confusing to find items on.

  • Our system is a model number search system. If you put a known good model number in the model number search field, it should be able to find it,if it is in the data base.

  • I found a parts break down but no owners manual for this unit in sears parts direct site.

  • I am sorry that the Manage My Life site did not have the model in the system. This may be, because of the age of the sander. The site looks at newer products unless we request that a older model product be included. It is still an evolving and growing web site and we are continuously doing improvements daily.

The link below will get you to the parts breakdown of the sander in Sears Parts Direct.

Sander parts .

Thank you for your comments and suggestions.

Read More
Sam A -
Sears Technician
October 08, 2010
Q:

another ? for Joey S.

A:

Thank you for your question and I understand your concern.

I added an image below with the procedure for accessing the surface control and how to access the radiant burners. NOTE: Disconnect the power supply from the range before removing the control panel and top.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
May 05, 2012