Model #13-0400 Dp misc exercise

  • Replacement Parts
    3 Results
  • Left And Right Hand Pedals
    3 Results
  • Handlebars
    3 Results

Question and Answers

Q:

What does error 13 mean?

A:

The E: 13 is a drain pump issue (drain pump time exceeded). It may be a faulty drain pump, bad wiring, or a clogged drain hose.

I have included a set of illustrated instructions (See below). These should step you through the process of examining the drain pump and its components.

This is a very labor intensive do it yourself project, if you are not completely confident in your repair skills, I recommend calling a service company to diagnose and repair your appliance.

If you need more assistance please resubmit question with more details. I will be looking forward to helping you again in the near future.

Note: Our imaging system is malfunctioning. I would like to apologize in advance if the attachments do not appear online.

Read More
Landell -
Sears Technician
December 28, 2009
Q:

Magnets for 351.217430 13" Crafstman Planer

A:

Thank you for your question on the magnets for the planer to help in changing the blades.

The part number for the magnets is: 16115.00 for 2.99 and you will need to order two.

It is key number 38 on the parts page.

Magnets for planer blade .

I hope this will help.

Sam A.

Read More
Sam A -
Sears Technician
October 04, 2011
Q:

which terminal do I connect the black ground wire to on the defrost timer

A:

First, the black wire is NOT a ground wire. The position of where the black jumper wire connects depends on how the timer was originally wired. It could be an accumulative run timer or it could be a continuous run timer. You will have to look at the wiring diagram for your specific model refrigerator. I added the instructions and a partial wiring diagram of the timer circuit for your specific model in the image below. The black defrost timer lead will need to be connected to terminal #1 for your specific model. See image below.

Read More
Joey S -
Sears Technician
May 19, 2010