Model #126T02-1346-B1 Briggs & Stratton engine

  • Cylinder/crankshaft/sump
    3 Results
  • Carburetor/fuel Tank
    3 Results
  • Rewind Starter/blower Housing
    3 Results
  • Gasket Sets
    3 Results

Question and Answers

Q:

B&S Engine model 126t02 carburetor install

A:

Thank you for your question.

I am sorry you are having a problem with the new carburetor. I looked up both of the carburetor numbers. The images I found have the mount for the air vane. I suspect you received the wrong carburetor. I recommend contacting parts to have them replace the carburetor.

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage My Life!

Mark T.

Read More
Mark T -
Sears Technician
October 08, 2012
Q:

How much will it cost me to have a new engine installed in my Tractor (20 H.P.) ?

A:

Thank you for your question.

I am sorry you are having a problem with the tractor. I have looked up the model number you have submitted. The replacement engine for the tractor is part number 331877-3036-G5 and can be ordered from our parts website. 331877-3036-G5. The cost of the engine is $ 768.15. I am sorry I cannot give you the cost for labor because the technician would have to give an estimate on that. You can call 1-800-469-4663 to schedule service.

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
September 22, 2011
Q:

drain hose size for Kenmore ultra wash dishwasher

A:

Thank you for your question.

I can understand wanting to know the size of the drain hose for the dishwasher.

The pump outlet is 1 inch and the disposal drain connection is 5/8.

  • I would strongly recommend that you order the original hose because of the requirements of the loop and internal check valve that is built in to hose for proper drain and feed back check valve flow.

The part number for the hose is W10137608 and you can purchase this hose from Sears Parts Direct .

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
November 19, 2010