Model #12-5063-57-04 TAPPAN range (gas)

  • Cover Page
    3 Results
  • Backguard
    3 Results
  • Door Parts
    3 Results
  • Body Parts
    3 Results
  • Gas Control
    3 Results
  • Broiler Drawer And Door Parts
    3 Results
  • Door Parts
    3 Results

Question and Answers

Q:

Who manufactures your trimmer mower 917.773740.

A:

I am sending you the same answer I sent for your question from 2/27. The Electrolux corporation purchased a portion of the Husqvarna company 4 years ago. The trimmers are manufactured in their plant in South Carolina. Did you try the phone number?

The 917.773740 walk behind trimmer is made for Sears by Electrolux Outdoor Products. The name of the company might have recently changed to Husqvarna Outdoor Products.

The phone number to contact them is (800) 833-5742.

Read More
Jimmy K -
Sears Technician
March 09, 2009
Q:

917,377130 part 57 bag frames comes in two parts

A:

Thank you for your question.

There are two types of bags. The first has a pocket that the back section of the frame threads. To install this style you have to thread the back section through the pocket. Then bunch up the bag so the ends of the frame are sticking out on each side. Now take the front part of the frame and slip it on to the back part of the frame. Most of the time, these will not line up because one of them is bent. If this is the case, flex the back section to match the front. Once you have them joined, work the bag into position along each side. Then work the vinyl binding over the frame opening.

The second style does not have the pocket. This style you have to slip both parts of the frame together first. Again, you might have to flex the parts to get then to fit. Once it is together put the bag over the frame and secure with the vinyl bindings.

I hope this is helpful. If you need further assistance, please reply below.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
September 19, 2011
A:

Thank you for your question.

There are two types of bags. The first has a pocket that the back section of the frame threads. To install this style you have to thread the back section through the pocket. Then bunch up the bag so the ends of the frame are sticking out on each side. Now take the front part of the frame and slip it on to the back part of the frame. Most of the time, these will not line up because one of them is bent. If this is the case, flex the back section to match the front. Once you have them joined, work the bag into position along each side. Then work the vinyl binding over the frame opening.

The second style does not have the pocket. This style you have to slip both parts of the frame together first. Again, you might have to flex the parts to get then to fit. Once it is together put the bag over the frame and secure with the vinyl bindings.

I hope this is helpful. If you need further assistance, please reply below.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
September 19, 2011
A:

I am sorry that was not helpful. I checked the instructions posted in the manual. I posted the instructions for you model below. Click on the image to enlarge it. If your model differs, please reply below. If you could include a picture of the bagger and frame it would be helpful.

Read More
Mark T -
Sears Technician
September 19, 2011
See more answers
Q:

Any one with the same problem with samsung washing machine WF448AAP/XAA 04

A:

I researched that part. The bottom portion of that dispenser housing is only available as a complete dispenser housing assembly (part DC97-14522A). Here is a direct link for that part: Dispenser Housing for Samsung Washer WF448AAP/XAA 04 .

Read More
Lyle W -
Sears Technician
March 24, 2012
A:

Let us know if that part fits properly if you get the chance. Let us know if you need more help.

Read More
Lyle W -
Sears Technician
March 26, 2012
See more answers