Model #12434984 Craftsman drill press

  • Drill Press
    3 Results

Question and Answers


Craftsman 15-in Drill Press Model 124-34984


Thank you for your question.

I will be happy to assist you. The chuck and shaft use a Morris taper to hold them in position. When installed correctly you need to use a removal wedge to remove the shaft. To properly put it together you should clean the inside of the taper and the shaft with acetone or carburetor cleaner. Then insert the shaft and chuck per the instructions in the manual. Following these instructions should ensure the unit does not come apart.

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life. Mark T

Read More
Mark T -
Sears Technician
December 03, 2012