Model #122K02-0628-E1 Briggs & Stratton engine

  • Cylinder/crankshaft/crankcase
    3 Results
  • Carburetor/muffler/short Block
    3 Results
  • Rewind Starter/blower Housing
    3 Results

Question and Answers

Q:

moved my armature coil on my B & S 6.0 hp , What's the clearence ?

A:

Thank you for your question.I am sorry you are having a problem with the Craftsman mower model 917.388903.  I will be happy to assist you. The air gap on the engine should be set to 0.010" Loosen the mounting screws and pull the coil away from the flywheel. Then turn the flywheel so the magnet is aligned with the coil. Then insert the feeler gauge between the magnet and the flywheel. Once in position loosen the screws and allow the magnet to pull the coil to it. Then tighten the screws and remove the feeler gauge.  I hope this is helpful. Please let me know if you need further assistance.   Thank you for using Manage my life. Mark

Read More
Mark T -
Sears Technician
July 23, 2013
Q:

What is an E1 error?

A:

Your digital display should have shown a F1 and not an E1 error code. F1 indicates a primary control failure. Meaning the machine control board will need to be replaced. I recommend calling a service technician to repair your dryer.

Read More
Jimmy K -
Sears Technician
April 09, 2008
Q:

Error message appears when I try to use self cleaning option on my oven.

A:

Thank you for your question and I understand your concern.

I added a link below with an answer from a previous question.

Can we fix the error causing the E1 F5 fault code on my Kenmore range?

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
August 17, 2011