Model #12-0525-5 Dp misc exercise

  • Slantboard Assembly
    3 Results

Question and Answers

Q:

What is the operating RPM of a Craftsman 103-2179 12" jig saw with 5" pin type blade?

A:

If you are needing the rpm of the input pulley it should be around 1000-1200.

Read More
Jimmy K -
Sears Technician
September 22, 2008
Q:

Looking for a Pulley Polyrib 1.75" 5/8" bore for a 12" band saw

A:

Thank you for your question on the ribbed pulley for the motor.

I apologize that the pulley you are looking for, as you already know, is no longer available and has no known substitute replacement part.

This band saw was made by the special products division of Emerson Electric and was a proprietary band saw only made for the Sears Craftsman line. The production of this band saw stopped in 1998 or before, and the parts supply for this product has been depleted.

The special products division no longer produces any wood working tool products and is out of business.

I am sorry that I cannot supply you with the pulley you need for your saw.

The only thing I can think of is to have a machinist make you a new one with the specifications from the old one.

You may be able to find a used one on line, on the woodworking power tool forums.

Sam A.

Read More
Sam A -
Sears Technician
February 22, 2012
Q:

A 12" circular saw blade with a 1" hole to use on a radial/table saw with a 5/8" arbor.

A:

Thank you for your question on the bushings for the miter saw arbor so you can use it on a 5/8 radial arm saw arbor.

I found a series of thickness bushings for 1 inch to 5/8.

I will give you a link for these bushings.

Saw blade bushings 5/8 to 1 inch .

I hope this is what you are looking for.

Sam A.

Read More
Sam A -
Sears Technician
July 18, 2012