Model #11653312305 KENMORE Attachments (Vacuum)

  • Power-mate
    3 Results
Find part by diagram >

Question and Answers


howwdo i take apart my vacuum cleaner power mate to fix belt


Good morning... I can fully understand your needing instructions to replace your belt.... I did locate a link that will discuss this situation in greater detail. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information. I hope this data will enable you to address and complete the task before you and have a nice day.

Read More
Henry -
December 10, 2012

Thank you for your question as to how to replace the brush roller drive belt in the Power Mate.

First pop off the top light cover lens from the top of the power mate.

Then remove the push in and twist to remove the light bulb.

Then locate and remove the two Phillips head long screws buy the light socket.

Then with your hands and fingers grip the sides of the top cover towards the back and pull out and lift up to remove from the power mate base.

You will now have access to the drive belt. While you are in there remove and clean the end cap bearings of dust and hair and put them back on.

I hope this information will help you with this repair.

Sam A.

Read More
Sam A -
Sears Technician
December 11, 2012
See more answers

Top Parts