Model #11632734201 KENMORE Vacuum, Upright

  • Nozzle
    3 Results
  • Dust Compartment And Motor
    3 Results
  • Hose And Attachments
    3 Results
Find part by diagram >

Question and Answers


how to take apart the agitators on a kenmore upright vacuum model 116.32734201


That's very inconvenient when one of your items that you use daily is not working correctly. I was able to find some general information for you. I hope that it provides some helpful hints.

Read More
celene -
November 07, 2010

Thank you for your question.

I can understand wanting to clean the roller brush area on your vacuum. Over time it can get built with debris.

  • To get to the roller brush assembly you will need to turn the unit upside down to get to the screws around the front and sides on the underneath area that secures the top to the base.

  • Once these screws are removed turn the unit back to its upright position and lift off the top cover.

  • There will be a secondary cover over the roller brush that you will need to lift off.

  • This will expose the roller brushes and the belts and tensioned systems.

I hope these instructions will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
November 08, 2010
See more answers

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show