Model #11625812508 Kenmore vacuum, canister

  • Canister
    3 Results
  • Attachments
    3 Results
  • Hose
    3 Results
  • Cord Reel
    3 Results

Question and Answers

Q:

After replacing the hose swivel on my Kenmore canister vacuum 11625812508, it will not turn on.

A:

There is a PCB (Power Control Board) in the handle at the switch and a PCB in the canister. One of those PCB boards could be defective or you could still have a wiring failure. Those PCB boards are not very expensive. You may try replacing one or both of those PCB boards to fix this problem. You can order parts from this page: Kenmore Vacuum Cleaner 116.25812508 Parts . If you need more help, reply with additional details.

If you get to a point where you want to have a service technician examine the vacuum cleaner and repair this problem, you can carry it into your nearest Sears Repair Center or Sears Store.

Read More
Lyle W -
Sears Technician
May 10, 2012
Q:

i need to know how to remove and install the connection pipe KC92PBZTZV06 onto my Kenmore model 11625812508

A:

That link for a previous answer that Alina F. posted in the above response should help you replace that connection pipe. If you need more help, reply with additional details and we will assist you further.

If you get to the point where you need to have a service technician replace that component, you can carry the vacuum cleaner into your nearest Sears Repair Center or Sears Store. Here is a link for the Sears Service website that has information on the nearest repair facilities in your area: Sears Home Services .

Read More
Lyle W -
Sears Technician
July 09, 2012
Q:

How do I change the HEPA filter on Progressive Canister Vacuum?

A:

I added an image with the written instructions on how to replace the HEPA exhaust filter.

The instructions should provide all the information needed to change the filter.

Read More
Joey S -
Sears Technician
August 13, 2008

Top Parts