Model #113299112 Craftsman saw circular

  • Frame Assembly
    3 Results
  • Base Motor Assembly
    3 Results
  • Rip Fence Assembly
    3 Results
  • Miter Gauge/hold Down Assembly
    3 Results
  • Guard Assembly
    3 Results
  • On/off Power Outlet
    3 Results
  • Legs
    3 Results
  • Table Extension
    3 Results
  • Adapter And Chute Collector
    3 Results

Question and Answers


Problems with Motor Pulley Key 113299112 Craftsman 10" belt drive saw


Thank you for your question and I understand your concern.

I added a link to the Owner's Manual for the Craftsman belt driven table saw model 113.299112 to reference in case you do not have it. On page 35 it will reference the 3/16" square key and pulley installation.

Before installing the 3/16" square key, apply some Loctite/thread locker on the square key and set screw and then install the pulley and make the proper pulley alignment and then tighten the set screw. The Loctite/thread locker should prevent the set screw and square key from working loose.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post. 

Read More
Joey S -
Sears Technician
June 13, 2013