Model #1-1-32-932ES Sportcraft pool table

  • Parts View
    3 Results

Question and Answers

Q:

After jointing, edges are leaving a crack of about 1/16 - 1/32" between the boards when trying to glue and clamp.

A:

Thank you for your question. I am sorry you are having a problem with the jointer. If the unit is leaving a gap between the boards, I recommend checking the blade height and the fence. If either of these is not adjusted correctly, it could leave a gap between the boards. I posted an image below that contains the instructions for adjusting blade height and the fence. Click on the image to enlarge it. Once enlarged follow the instructions. Be sure you unplug the unit before servicing and be careful around the blades.    I hope this is helpful. Please let me know if you need further assistance.    Thank you for using Manage my life. Mark T.  

Read More
Mark T -
Sears Technician
April 10, 2013
Q:

HAVE 32" ELEMENTS TV, REMOTE QUIT, @ 1 POINT, COULD TURN TV OFF @ SET, THEN TURN BACK ON W/REMOTE, NOW TV WON'T RESPOND @ALL, HELP

A:

If you are sure that the remote is not the problem, then it only leaves the TV which would need to be serviced. The problem with using a universal remote as a second source is that you are not sure if that particular remote can even operate the TV. If you feel that you have a good match for the remote then you will likely need service.

Read More
David A. - Personal Solutions Manager -
Sears Technician
August 02, 2010
Q:

I have McCulloch 32 ccc chainsaw . The oil line is broken and I can only see about 1" sticking out the oil reservior. I don't the other end. Where does it go ?

A:

Thank you for your question on the chain saw oil supply line.

If as you say you can only see a inch of the oil line the other end goes into the oil reservoir with a pick and filter for the bar oil.

The other end is the oil spout that fits next to the bar mount.

In order to give you any kind of pictures I will need the model number off the saw.

Please reply with that information and I will research what you are looking for.

Sam A.

Read More
Sam A -
Sears Technician
September 20, 2011