Model #113248321 CRAFTSMAN Saw Band

  • Drive Assembly Parts
    3 Results
  • Base Components
    3 Results
  • Bevel Drive And Motor Mount Assembly Parts
    3 Results
  • Leg Set Parts
    3 Results
  • Motor
    3 Results
Find part by diagram >

Question and Answers

Q:

Band Saw 113248321, is there a conversion kit for the blade rollers-bearings for this saw.

A:

Thank you for your question.

I have checked the model number you have submitted. I am sorry we do not offer a bearing type blade guide for this saw. I usually find the after market parts for my tools at Rockler.com. They sell a lot of different up grades for tools. I hope this is helpful.

Please reply below if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
November 25, 2010
Q:

I'm looking for a rip fence and angle guide for a model 113248321 12" bandsaw.

A:

Thank you for your question.

I can see the benefit of having the other accessories for your band saw.

Only some of the models came with a fence and other accessories as a special purchase stock number but the model you have never came with a fence or a miter gauge. They were available as accessories for a short period of time for this tilt head band saw until they ran out of stock.

This style tilt head band saw was the only one on the market at the time and its general usage was for scroll cutting and not re-sawing or to be used with a fence.

This manufacture no longer build this saw shortly after that 1993 date and in about 2000 stopped production of all power tools.

You may be able to find one on the web that someone is willing to part with. Try a site called Woodworking.com and I have also see people selling these old saws

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
February 16, 2011
Q:

Drive Pulley Key 113248321 Craftsman 12" band saw

A:

Thank you for your question. 
 

I am sorry you are having a problem with the saw. I do not recall ever needing a puller to remove the pulley on these. All you have to do is loosen the setscrews on the back of the pulley. Once they are loose, the pulley should slide off the shaft. If it will not come off and the key is missing, try to turn the pulley while someone folds the wheel. It should come off then. 
 

I hope this is helpful. Please let me know if you need further assistance. 
 

Thank you for using Manage my life. 
Mark. 

Read More
Mark T -
Sears Technician
May 09, 2013
A:

Thank you for your question. 
 

I am sorry you are having a problem with the saw. I do not recall ever needing a puller to remove the pulley on these. All you have to do is loosen the setscrews on the back of the pulley. Once they are loose, the pulley should slide off the shaft. If it will not come off and the key is missing, try to turn the pulley while someone folds the wheel. It should come off then. 
 

I hope this is helpful. Please let me know if you need further assistance. 
 

Thank you for using Manage my life. 
Mark. 

Read More
Mark T -
Sears Technician
May 09, 2013
A:

pete in nc, I am glad the pulley came off without any problems. Please let me know if you run into problems installing the key. Thank you for using Manage my life. Mark

Read More
Mark T -
Sears Technician
May 11, 2013
A:

pete in nc, I tried to find an image of the pulley but did not have any luck. If I remember correctly, the setscrew tightens against the key. I used to put a drop of lock tight on the setscrew threads to keep it from coming loose like it did on yours. Please let me know how the repair goes. Thank you for using Manage my life. Mark T.

Read More
Mark T -
Sears Technician
May 15, 2013
A:

pete in nc, I am glad to hear you have it up and running. As long as you tightened the setscrew enough, it should not come loose. If it does, then put the loctite on. Thank you for using manage my life.

Read More
Mark T -
Sears Technician
May 15, 2013
See more answers

Top Parts