Model #11323800 Craftsman lathe

  • Unit
    3 Results

Question and Answers

Q:

Do you have a faceplate for a Craftsman Woodlathe(11323800)?

A:

Thank you for your question on the face plate for the wood lathe.

If you are looking for the spindle for the head stock the part number is 56611 for about $46.00.

Head spindle for lathe .

The spindle is hollow and you should be able to use a long rod from the pulley end and tap it out from the back side.

The spindle is a #1 Morse taper at 16 RH threads per inch and 3/4 inch diameter.

There is any number of sizes available for face plates as long as they have the correct thread and diameter as listed above.

8 inch face plate .

I hope this will help.

Sam A.

Read More
Sam A -
Sears Technician
January 04, 2012
A:

Thank you for the feed back and how did you get a piece of Russian Olive? A fellow tuner, Sam A.

Read More
Sam A -
Sears Technician
January 06, 2012
See more answers
Q:

How old is my lathe? 11323800 Craftsman Craftsman 12-inch wood-turning lathe

A:

Thank you for your question. I will be happy to assist you. According to the information we have the lathe was built in the mid 70’s.

I hope this is helpful. Please let me know if you need further assistance. Thank you Mark.

Read More
Mark T -
Sears Technician
January 14, 2013
Q:

what year was this model# 113-23800 serial #3976sears 12 " wood lathe made in 11323800 Craftsman Craftsman 12-inch wood-turning lathe

A:

That model was manufactured in 1974 and 1975.

Read More
Lyle W -
Sears Technician
November 05, 2013

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show