Model #113226421 CRAFTSMAN Sander

  • Unit
    3 Results
Find part by diagram >

Question and Answers


belt/disk sander


I think its great that you are wanting to do some repairs on your own and I will be happy to help. I did some research and I was able to find a link that will guide you with replacing the belt. I hope this helps with your sander repairs while you wait for your expert response.

Read More
Joseph P. -
December 12, 2012

Thank you for your question on the replacement of the drive belt for the belt and disk sander.

Check to see if there is another set screw on the other side of the disk hub. The disk should just slide onto the drive shaft with the set screw or screws holding it to the shaft.

If there is not then the divot that the set screw made may be holding the disk from coming off.

If you can use a wedge to hold drive roller from turning and then try to rotate the disk back and forth to loosen it from the drive shaft.

Please let me know what you have discovered and we can continue to troubleshoot with that information.

Sam A.

Read More
Sam A -
Sears Technician
December 13, 2012
See more answers

Top Parts