Model #11211(1988) Kenmore wall oven, gas

  • Gas Double Oven
    3 Results

Error Codes

Error Code:



Question and Answers


1988 sears band saw


Thank you for your question.

I am sorry you are having a problem with the saw. The motor pulley should just slide on to the motor shaft. Then align the slots in the shaft and pulley. Once aligned push the key into the slot. This will keep the pulley from spinning on the shaft. Once every thing is aligned, tighten the setscrew on the back of the pulley. The image below has the instructions for attaching the pulley and the motor to the saw. Please click on the image to enlarge it. If you are missing any of the parts or if the motor pulley is loose on the shaft you can order them from our parts website: Sears Parts Direct .

I hope this is helpful. Please let me know if you need further assistance. A picture would be helpful if you have a camera.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
December 04, 2011

Is the manual for a Kenmore stove model #363.9878810 made in 1988 available?


All ovens are vented some how and somewhere. Your specific model oven is supposed to be vented under the right rear burner and it should not be capped. It is supposed to exhaust up under the right rear burner pan hole and out under the burner element. However, it's suppose to have a "body vent" sitting over the opening of the oven vent tube in order to slightly redirect the oven heat over under the center of the right rear burner. Make sure it has the "body vent" sitting in the correct position and make sure the drip pan has the hole in the center in so the oven heat can vent up through the center of the right rear burner. (See image below) Key# 254 is the "body vent" that is used to slightly redirect the oven exhaust. If it's missing or not sitting correctly it will cause the main top to get extremely hot because it is not directing the heat up through the center of the right rear burner pan and element. If you find that the body vent key# 254 is missing, the "body vent" is no longer available.

The user's manual is not available online but it appears to be available for ordering, part# S594001. I added a link to Sears Parts Direct below with the user's manual looked up for you.

Read More
Joey S -
Sears Technician
May 04, 2009

1988 KENMORE SENSOR COOK + MODEL #: 564.8844881


Thank you for your question on the manual for your microwave.

I am sorry that we no longer have a manual available for the microwave.

I have e-mailed you a manual for the closet one I could find in the 564.88 series microwave.

I hope it will help.

Sam A.

Read More
Sam A -
Sears Technician
October 21, 2011