Model #11096747701 KENMORE ELITE Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
  • 8576353 Burner Assembly
    3 Results
  • Door Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers


Kenmore Elite HE3 Steam Gas Dryer model #110.96747701 doesn't seem to be heating up.


A dryer is definitely something we depend on and when it begins to malfunction it can be a huge inconvenience. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question.

Read More
aashe -
October 16, 2011

Thanks for contacting I am sorry you are having a problem with your dryer. For gas dryers you would need the standard 120v outlet. Only electric models use the 220v power because of the heating element. If the dryer was hooked up to a 220v type outlet something may have been burned out causing it not to dry.

This may also be caused by a clogged vent in the home as well. Check to make sure the vent is clean. Other than that parts in the dryer would need to be tested by a multi-tester/Ohms meter starting with the igniter. If the igniter is coming on but not lighting the burner I suspect weak gas valve coils. In the wiring diagram provided below all of the components between common at the heater relay and the igniter have to show good in order for the igniter to work.

If you would like to view parts diagrams or view parts please visit with the model number.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. You may visit and click on the red Start now button.

I hope this helps.

Thank you for using

Read More
Jonathan B -
Sears Technician
October 17, 2011
See more answers

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show