Model #11095087400 KENMORE ELITE Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
  • 8318276 Burner Assembly
    3 Results
  • Door Parts
    3 Results
  • Pedestal Parts (not Included) (15 1/2`` Pedestals Only
    3 Results
  • Pedestal Parts (not Included) (13`` Pedestals Only), O
    3 Results
Find part by diagram >

Question and Answers


Replacing dryer heater relay 110.95087400


Hello glad to help.  Thank You for choosing Sears
I am sorry and do understand your frustration when there is problems with the dryer.
Glad to help out.   Im  looking at your Kenmore Dryer model number 110.95087400.

First thing for safety and concerns to keep dryer running well is to check the lint screen and vent of air flow going out of the house.   If clogged up it could cause heating problems on any dryer.
To prevent a Blocked Vent Hood, once a year: 
1.  Clean any lint blockage from the exhaust vent hood.
2.  Make sure the vent hood flappers move freely.
3.  Check for screen/grate openings that allow bird or rodent nests.
4.  Replace exhaust vent hood if damaged.
5.  Check for good air flow while running the dryer.
Note: Poor airflow or decreased airflow indicates further vent system cleaning is needed.

All items can be checked with a volt meter for continuity.
When a gas dryer isn't heating there are a few things to look at.
In the burner system you have
1.  The ignitor key number 4 on burner page
2.  The pair of coils 13 & 14 on burner page
Behind the blower there is
3.  The thermistor key number 42 on blower page
4.  The thermal fuse  key number 59 on blower page.

Burner page for model 110.95087400

Blower page for model 110.95087400

Sorry to say there is no relay as a separate part off the board.   Check the wiring also off the board to see if there aren't any bare, burnt, or loose connections.


Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website:

Read More
Larry L -
Sears Technician
April 16, 2014

Gas valve test 11095087400


Thank you for choosing Sears Parts Direct. I can certainly assist you in locating the instructions to test your gas valve. I did look into the model number you have provided and I have found information.  I have attached the photo of what the readings should be on your gas valve. Let me know if this helps.

You can also visit for parts, diagrams, and repair information.
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
April 14, 2014

Dryer initially gets hot then stays cool the rest of the cycle 11095087400 Kenmore Elite Dryer


Your symptoms indicate that the gas valve coils are weak. The high resistance on that one coil seems to confirm that diagnosis. The coils are available in a kit (part 279834). Replacing both coils should fix your problem. Be sure that you unplug the dryer and shut off the gas supply before accessing and replacing internal components. Remove the bottom front service panel and the lint duct cover. Remove the heat shield in front of the burner. This should give you access to the gas valve coils. If not, you may need to remove the top, console and front panel. 

If you need more help, let us know. 

Read More
Lyle W -
Sears Technician
November 19, 2013

Top Parts