Model #11092583110 Kenmore residential washers

  • Top And Cabinet
    3 Results
  • Control Panel
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Miscellaneous
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Water System
    3 Results

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How do I install a mixing value on a Kenmore Washer Model 11092583110

A:

Thank you for your question.

I see that Maira E has given you a link to an answered question on a slow cold water fill. I would like to add the following information.

I recommend turning the water off to the washer. Then remove the cold water hose. Place the hose into a bucket and turn the valve on. If the water flow is good, check the inlet screen inside of the mixing valve. This screen will plug up with rust and sand that reduces the flow of water into the washer. I have provided you with an image below showing the inlet screen. I do not recommend removing the screen to clean them. Just use a bowl of water and a turkey baster to flush out the debris. You may need to use a small screwdriver to scrape the debris out. Once the screen is clean reinstall the water hose and check the fill of the cold water. If it is still slow, you need to replace the mixing valve. You are correct the part number is 285805. Please click on this link to order the valve .

Replacing the valve is not a difficult repair. Start by unplugging the washer and turning the water off. Then follow the instructions I have added below. Make sure to make the wire to the valve before removing them. I also recommend placing a towel below the valve before you remove the hose to catch the water that will come out. If you have any other questions, please reply below with more details and I will get right back to you. If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
October 05, 2010
Q:

how to replace a lid switch for a model 11092583110 washing machine

A:

Thank you for your questions.

I am sorry you are having a problem with the washer. I will be happy to assist you in replacing the lid switch first, unplug the washer from the outlet. Then follow the instructions in the image below. Just click on the image to enlarge it. I have found a video that will give you more confidence in doing the repair yourself. Click here to watch the video.

I hope this is helpful. If you need further assistance, please reply below with more details.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
October 02, 2011