Model #11092573200 KENMORE Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Control Panel
    3 Results
  • Rear Panel Parts
    3 Results
  • Agitator, Basket, And Tub Parts
    3 Results
  • Miscellaneous Parts
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump Parts
    3 Results
  • Machine Base Parts
    3 Results
  • Ring Harness Parts
    3 Results
  • Water System Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How do I install a Lid Switch on a Kenmore 70 series Washer, Model #11092573200

A:

Thank you for your question.

I should be able to help you with replacing the lid switch on the washer. First, make sure to unplug the washer. To you replace the lid switch you have to remove the cabinet of the washer. The instructions for that are in the image below. Once the cabinet is removed you can take the screws out securing the lid switch and remove the harness from the clips along the underside of the cabinet. Then reinstall the lid switch in the reverse order. Before you reassemble the cabinet, please read the instructions for installing the cabinet provided in the image. The front of the cabinet has to be hooked under the base of the washer.

I hope this is helpful. Please reply below if you need further assistance. Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life. Mark T.

Read More
Mark T -
Sears Technician
February 15, 2011
Q:

Should I get a new washer or repair my old washer.

A:

Thank you for your question.

I am sorry you are having a problem with your washer. I suspect the problem with the washer is a broken motor coupler. The coupler links the motor to the transmission instead of using a belt. When the coupler breaks, the washer will not agitate or spin and often will make an unusual noise. The part number for the coupler is 285753A and can be ordered from our website Sears Parts Direct .

To replace the coupler unplug the washer first. Then use the images below to access the coupler. Use a screwdriver to pry off the rest of the old coupler. Then tap the new coupler onto the shafts with a deep well socket and a hammer. The parts of the coupler should be flush with the end of the shafts. Then reassemble the washer in the reverse order.

I have also found a video that will give you more confidence in repairing the washer yourself. Please click here to watch the video .

I hope this is helpful. Please let me know if you need further assistance.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 21, 2012

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show