Model #11074952300 KENMORE residential dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
  • Burner Assembly
    3 Results

Error Codes

Error Code:



Question and Answers


Hi, I have a kenmore dryer model 11074952300. The gas fires up and shuts down repeatedly, Would you be able to tell me what thermostat or sensor I need?


The most likely failure is a restriction or blockage in the venting system. For testing purposes only, disconnect the vent hose from the back of the dryer and then start the dryer. NOTE: DO not have the door open while running or the flame will short cycle. If the flame continues to shut off real soon after it ignites with the vent hose disconnected I recommend replacing the high limit thermostat first. The high limit (key#43) is located on the top of the burner cone (key#46). The high limit is part #3403140 and is available at Sears Parts Direct . I added an image below showing how to remove the lower access panel. Note: Disconnect the power cord from the power supply before removing the lower access panel.

Read More
Joey S -
Sears Technician
October 04, 2010

Top Parts