Model #1107308810 KENMORE Residential Dryer

  • Bulkhead Assembly
    3 Results
  • Cabinet Parts
    3 Results
  • Top And Console Assemby
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Dryer model 1107308810 how remove & install door switch part 279347

A:

Thank you for your question and I understand your concern.

Removing and replacing the door switch is a fairly simple once the top panel has been hinged open. The door switch is supposed to come with the instructions.

I added an image below with the instructions for hinging the top up. Once the top is up you will have access to the door switch. The door switch is mounted in a bracket with two screws. Remove the two screws and disconnect the wires from the old switch. Make a note of which terminals the wires are connected to before disconnecting the wires. NOTE: Disconnect the power cord from the power source before raising the top.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
April 17, 2012
A:

Stan: The original question I answered pertains to a dryer and not a washer. Your model washer 110.74111480 calls for lid switch part #279347.

Read More
Joey S -
Sears Technician
February 21, 2013
See more answers

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show