Model #11069622800 KENMORE Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
  • Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


Heats not cycling on & off . 11069622800 Kenmore Residential dryer


Timer does not stop 11069622800 Kenmore Residential dryer


Kenmore 600 (Model 110.69622800) will not start 11069622800 Kenmore Residential dryer


Thank you for choosing and being a valued member. I can certainly assist you.

Thermal Fuse:
When the lights are on but an electric dryer will not run the most likely cause of the problem and first thing to check is the thermal fuse located on the exhaust housing behind the rear panel. The fuse can be checked for continuity if a meter is available.

How to test push to start switch:
To test this component, unplug the dryer and access the switch in the console. Check the continuity through the contacts where the blue wires are attached. Without the button pushed, you should measure infinite resistance (open). Push the button and hold it in. Measure the resistance through the leads with the button pushed in. You should measure near zero ohms of resistance (closed) while the button is pushed in. If not, then the switch is bad and will need to be replaced. 
3398095 part number for start switch.

The door switch could also cause the dryer not to start. 
 You can also check is to the door switch. You can open the dryer door & press in on the door switch with your finger, you should hear & feel a click. If the door switch is not responding you will need to replace it.
3406107 part number for door switch.

If the dryer will run after you adjust and play with the timer, this indicates that you likely failure is in that timer component (part 3976576). Replacing that timer will probably fix your problem.

You can also visit for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
July 21, 2015

Top Parts