Model #11063942101 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


dryer runs, gets hot, stops 11063942101 Kenmore Electric dryer


Does it pop the circuit breaker? If so, shut off the dryer breaker and remove the cover. With the breaker off, tighten both terminal screws on the breaker. Sometimes just a 1/8 turn is enough to tighten them. If you are not comfortable with electricity have someone who is do this for you. What happens, if this solves the problem, is the "loose" connection heats the breaker which causes it to trip. Otherwise some dryers have a resealable thermostat that cuts out supposedly when the temp get too high. If you have one of those, it has gone bad or is about to fail. It has been years since I worked at repairing them, so I forget even what it looks like.

Read More
Gene -
December 07, 2015

Need to change the switch on my compact dryer Mod# 110.82182200. but not sure how to remove the top of the dryer to get to the body of the old switch inside the unit

Read More
Curtis -
December 08, 2015
See more answers

Electri dryer runs with no heat 11063942101


Should a dryer thermistor check open or closed? 110.63942101


Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dryer. Upon researching model110.63942101; all thought the thermistor can cause this problem it normally is not responsible for causing this problem if the continuity test reads continuity. It sounds like the motor may need to be replaced.  I have posted a link of the motor to view the link click here.

 I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
June 16, 2015

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show