Model #11047781701 KENMORE ELITE Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Dispenser Parts
    3 Results
  • Tub And Basket Parts
    3 Results
  • Steamer, Pump And Motor Parts
    3 Results
  • Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

What does F 35 mean on Kenmore elite washer model # 11047781701?

A:

The F35 indicates a water level pressure sensor failure. The SUD is normally displayed when there is excessive detergent suds in the tub. A loose wire harness connection could be causing this problem is there is no water or suds in the tub. I recommend unplugging the washer and removing the top panel. Screws at the very back of the top panel secure it to the washer frame. Remove the screws and then pull the top panel slightly back and then up and off of the washer. The analog water level pressure sensor is shown in the first image below. The second image shows a clear picture of this component. Check the wire harness connection on this sensor. If you find a loose connection, secure the wire harness properly on the component then reassemble and test the washer. If you continue to get the F35 code, then this component will need to be replaced.

If you need more help with this problem, please add more details of what you have found with the above checks. . Thank you for using Manage my life.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Mark T -
Sears Technician
August 29, 2010
Q:

it looks like part number 10156252 has been givng sears trouble since day 1 based on blogs. is sears going to replace washers since part is not available?

A:

You are correct. That part was giving Sears some problems. According to the information that I currently see, that part has worked its way through the supply chain and is now in stock. It appears that the supply problem for that part has been resolved at this time. Your washer model will use part number W10415587 for the pressure switch. You can order that part from the Sears PartsDirect website. Here is a direct link for that part: Water Level Switch .

I understand your concern about the trouble that Sears had with this part. It appears that the supply situation for that part has been resolved. I hope that you are able to obtain the part and fix your washer as quickly as possible. If you need more help, reply with additional details and we will try to assist you further.

Read More
Lyle W -
Sears Technician
August 02, 2011
Q:

f35 error

A:

Thank you for your question.

The manufacture was having problems with the previous pressure manufacture so they have gone to a new supplier. I have looked up the pressure switch for your washer and it is W10415587 and can be ordered from this link .

If you need further assistance on the washer, please reply to this post.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
August 02, 2011

Top Parts