Model #11046472501 Kenmore residential washers

  • Top And Cabinet Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Dispenser Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Tub And Basket Parts, Optional Parts (not Included)
    3 Results

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore HE2 washer (11046472501)

A:

Thank you for your question.

I should be able to help you clean the drain filter on your washer. First, unplug the washer and get some old towels. The follow the instructions I have posted in the image below. Once you have the cover removed, place the towels around the pump to soak up the water that will leak out when the filter is removed. I recommend just loosening the filter cover so that you can control the amount of water coming out. After the water is drained, remove the filter and clean out the debris. Then reassemble the washer in the reverse order.

Please let me know if you need further assistance on the washer.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
February 04, 2011
Q:

install boot on kenmore washer#11046472501

A:

Thank you for your question.

I am sorry you are having a problem with the washer. I should be able to help you replace the door bellows on you washer. I have provided you with a set of instructions below showing step-by-step instructions for replacing the bellows. Please read through the instructions before you decide to do the repair. If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Please make sure to unplug the washer before attempting any repair of the washer. I hope this is helpful.

Please let me know if you need further assistance.

Here is a link to order any parts you need. Sears Parts Direct .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 05, 2011
A:

Thank you for the reply. I know it can be difficult to replace the outer clamp. I have found a video that should show you the easiest way to install the clamp. The only difference it you need to end up with the spring on the bottom. The detergent and an extra pair of hands make installing the clamp easier. I have added a link below for the video.

Read More
Mark T -
Sears Technician
January 07, 2011
See more answers
Q:

Kenmore HE washer. 11046472501 The wire ring on my front loader came off the seal. Do you have a diagram to help me put it back on properly?

A:

Thank you for your question and I understand your concern.

I added a YouTube video showing how to install the wire and spring on the bellow/boot. The wire and spring retainer installation begins at the 3:55 minute mark in the video.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
May 30, 2012