Model #11029842991 Kenmore residential washers

  • Top And Cabinet
    3 Results
  • Control Panel
    3 Results
  • Rear Panel
    3 Results
  • Agitator/basket/tub
    3 Results
  • Brake/clutch/gearcase/motor/pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Water System
    3 Results
  • Miscellaneous
    3 Results

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

automatic washer model 11029842991 water runs all the time even when off

A:

Thank you for your question and I understand your concern.

If you unplug the washer and water continues to enter the washer, remove and replace the water inlet valve.

If you feel confident in replacing the water inlet valve; I added a YouTube video showing the procedure of accessing and replacing the water inlet valve assembly. If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

The water inlet valve #285805 for Kenmore washer model 110.29842991 can be ordered from Sears Parts Direct.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
April 26, 2012
Q:

Thumping sound in spin cycle: 11029842991 Kenmore Automatic washer

A:

That link for a previous answer that Yadira B. posted in the above response has a video that shows how to access the clutch and transmission in this type of washer. You can use that information to access and check those components. Be sure that you unplug the washer and shut off the water supply before accessing internal components.

If that clutch is bad, then it will need to be replaced. You can order parts from this page: Kenmore Washer Model 110.29842991 Parts .

If you need more help, reply with additional details and we will assist you further.

If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
January 18, 2013
Q:

broken lid switch

A:

Thank you for your question.

I am sorry to hear you are having problems locating the lid switch. I have checked and found the lid switch is still available. The part number is 3949238 and can be ordered from the following link. Lid switch

It is not advised to run the washer with the lid switch bypassed due to safety reasons. I recommend replacing the lid switch.

Please reply below if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
October 26, 2010