Model #11024962300 Kenmore Elite residential washers

  • Top And Cabinet Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Rear Panel Parts
    3 Results
  • Agitator, Basket And Tub Parts
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump Parts
    3 Results
  • Machine Base Parts
    3 Results
  • Wiring Harness Parts
    3 Results
  • Brake And Drive Tube Parts
    3 Results
  • Gearcase Parts
    3 Results
  • Water System Parts
    3 Results
  • Miscellaneous And Optional Parts (not Included)
    3 Results

Question and Answers

Q:

No spin model 110249623-00

A:

Thank you for your question and I understand your concern.

Opening and shutting the lid is more likely causing it to begin spinning more so that turning the agitator. If the timer does not pause the motor operation after it completes the drain cycle its not going to shift into spin. If the washer is draining all the water and the motor pauses and restarts after draining and it does not spin could be a sign of a worn clutch or brake release lever. It could also have an intermittent failure within the gear case too.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
January 12, 2012
Q:

Kenmore 11024962300 Elite Washer will not spin

A:

Thank you for your question and I understand your concern.

Based on your symptom and details it sounds like it may have a broken motor coupler if the washer will drain water.

I recommend checking the motor coupler to see if it is broken or stripped. I added a YouTube video showing how to access and replace the motor coupler .

The motor coupler is part #285753A which can be ordered from Sears PartsDirect if you find the motor coupler broken/stripped.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
March 12, 2012
A:

Kathy: I recommend replacing the clutch at this time and it will likely spin. Order part #8299642 (clutch assembly).

Read More
Joey S -
Sears Technician
March 16, 2012
See more answers
Q:

I have a kenmore elite washer machine. Model number is 11024962300.

A:

Thank you for your question and I understand your concern.

The agitator does not have to spin along with the spin basket however the friction between the agitate shaft and the spin tube will normally cause the agitator to spin along with the spin basket. If you were to hold the agitator and put the washer in spin, you would be able to hold it from spinning which is normal.

Now, if you're saying the basket is not always spinning, it could have a worn clutch assembly. The service fee is approximately $130.00 which includes labor but not parts. If you feel confident in repairing the washer yourself, I added a YouTube video showing how to access and replace the clutch assembly . The part number of the clutch assembly is 8299642 which can be ordered from Sears PartsDirect .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
January 25, 2012