Model #11023822100 Kenmore residential washers

  • Tio Abd Cabinet
    3 Results
  • Control Panel
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Brake/clutch/gearcase/motor/pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Water System
    3 Results
  • Miscellaneous
    3 Results
  • Brake And Drive Tube 388952
    3 Results

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

washer machine model 11023822100 (kenmore)

A:

Hello Cuong,

Thank you for submitting a question to Manage My Life.

I am sorry you are having problems with your washer.

By what you have stated, it sounds like a lid switch failure. The lid switch has to be closed for the drain and spin cycle on your washer to work. If the lid switch is faulty, it will fill and wash but nothing else. A quick check you can do is to bypass the lid switch and see if it will drain. If the washer operates, the lid switch needs to be replaced.

To bypass the lid switch you need to unplug the washer and open the console. Here ia a video that will demonstrate gaining access to the lid switch; Video . Once you have the console open, locate the connector for the lid switch. Place an insulated piece of wire between the two colored wires (see image below), not the green it is a ground and will cause a short. After inserting the bypass make sure it will not touch anything metal, plug the washer in. Start the washer in a drain cycle. If the washer drains and spins, you need to replace the lid switch. Do not leave the bypass in place while you are waiting for the part. This is only for the test.

The instructions for replacing the lid switch are in the video provided.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Here is a link that you may use for parts purchases or to view your parts list diagram Sears Parts Direct .

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Thanks again for using Manage My Life.

Landell

Read More
Landell -
Sears Technician
September 01, 2011
Q:

Kenmore Washer Model No.: 11023822100 Rear Panel

A:

Hello Jesus,

Thank you for submitting a question to Manage My Life.

Here is a video that will show you how to replace your lid switch; Video . Always unplug or de-energize electrical equipment before removing covers or attempting service. Be careful and wear appropriate hand protection when working around sharp metal parts. This video is for demonstration purposes only. This washer may not look exactly like yours, but the procedure is basically the same.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Here is a link that you may use to view the parts list diagram and for parts purchases; Sears Parts Direct . I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Thanks again for using Manage My Life.

Landell

Read More
Landell -
Sears Technician
July 30, 2011
Q:

What size is my kenmore 80 series washer model 11023822100?

A:

Thank you for your question.

I will be happy to assist you. I have looked up your model you submitted. This is a 3.2 cubic foot model.

Please let me know if you have any other questions.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
November 08, 2011

Recommended maintenance parts & accessories

Show 3 more
No more item to show