Model #11022952100 Kenmore residential washers

  • Top And Cabinet Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Rear Panel Parts
    3 Results
  • Agitator, Basket And Tub Parts
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump Parts
    3 Results
  • Machine Base Parts
    3 Results
  • Wiring Harness Parts
    3 Results
  • Brake And Drive Tube Parts
    3 Results
  • Gearcase Parts
    3 Results
  • Water System Parts
    3 Results
  • Miscellaneous And Optional Parts (not Included)
    3 Results

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore washer model 11022952100

A:

There is a square fitting in the middle of that spring retainer (the green piece). A 1/2" square drive socket extension (with out a socket attached) will fit in that component so that it can be removed by twisting it to unthread it. If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
December 03, 2011
Q:

washer stops in wash cycle and will not continue or drain or spin ten sometimes it smokes, what can I do????????? model # 11022952100

A:

These symptoms point to a problem with the drive motor or a wiring problem. If the motor starts or hums briefly and then stops, it could be kicking out on overload and will not restart until it cools down then it will likely kick back off after trying to start. You could have a bad drive motor or a friction problem that is preventing the motor from running. I recommend that you have a service technician diagnose and repair this type of problem. Here is a link for the Sears Service website: Sears Home Services .

Read More
Lyle W -
Sears Technician
July 12, 2010