Model #11022902100 Kenmore residential washers

  • Top And Cabinet
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Brake/clutch/gearcase/motor/pump
    3 Results
  • Machine Base
    3 Results
  • Control Panel
    3 Results
  • Wiring Harness
    3 Results
  • Water System
    3 Results
  • Miscellaneous
    3 Results
  • Brake And Drive Tube 388952
    3 Results

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

washing machine spin

A:

The video that Aashe provided in the above response may help you resolve this spin problem.

If the washer stops when it gets to the spin cycle and will not continue to drain the washer and spin out the clothes then you probably have a broken lid switch.

The image below shows how to access that component. Here is a video that also shows how to access the lid switch: Video: Washing Machine Lid Switch Replacement .

The image below shows how to place an insulated jumper wire in the wiring harness for the lid switch to bypass that function. The wiring harness on your lid switch should have a gray and tan wire. If you are able to bypass the switch as shown in that image, then you can check to see if the washer will run properly in the drain and spin mode. If it does then replacing the lid switch should fix this problem.

You can order a new lid switch from the Sears PartsDirect website. The part number for the lid switch is 3949238.

NOTE: Do not continue to operate the washer with that lid switch bypassed . That component must be replaced to safely operate the washer.

If the motor runs in the spin mode but the basket does not move, you could have a problem with the clutch or basket drive. Reply with additional details if you need help with this type of problem.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
May 07, 2011
Q:

Kenmore washer has stopped spinning

A:

Thank you for your question.

I am sorry you are having a problem with your washer. I suspect the problem with the washer is a broken motor coupler. The coupler links the motor to the transmission instead of using a belt. When the coupler breaks, the washer will not agitate or spin and often will make an unusual noise. To verify the problem, I recommend starting the washer in a wash cycle. After the washer fills, check to see if the washer is agitating. If it is not, the motor coupler is likely the cause. The part number for the coupler is 285753A and can be ordered from our website Sears Parts Direct .

To replace the coupler unplug the washer first. Then use the images below to access the coupler. Use a screwdriver to pry off the rest of the old coupler. Then tap the new coupler onto the shafts with a deep well socket and a hammer. The parts of the coupler should be flush with the end of the shafts. Then reassemble the washer in the reverse order.

I have also found a video that will give you more confidence in repairing the washer yourself. Please click here to watch the video .

I hope this is helpful. Please let me know if you need further assistance.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 02, 2012
Q:

I have a Kenmore 90 series model# 11022902100 that won't spin. if I help move the basket it moves slowly what could be the problem?

A:

That type of problem is normally caused by a bad clutch. Here is a video that shows how to replace that clutch assembly: Washing Machine Clutch Replacement . If you want to fix this problem yourself and you are confident that you can complete that repair, then you can order the clutch kit from this page: Complete Clutch Assembly for Kenmore 90 Series Washer 110.22902100 . Be sure that you unplug the washer before accessing internal components.

If you need more help, reply with additional details and we will assist you further.

If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
May 01, 2012