Model #11022442100 Kenmore residential washers

  • Top And Cabinet
    3 Results
  • Control Panel
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Brake/clutch/gearcase/motor/pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Water System
    3 Results
  • Miscellaneous
    3 Results
  • Brake And Drive Tube 388952
    3 Results

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

installing lid switch

A:

Thank you for your question.

I am sorry you are having a problem with the washer. I have found a video that shows how to replace the lid switch. Click here to watch the video. Make sure to unplug the washer before you attempt any repairs.

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
March 10, 2012
Q:

Kenmore Washer 11022442100 wont spin or rinse

A:

This type of problem is usually caused by a failed lid switch. Replacing that component will likely fix this problem based on your symptoms.

You can unplug the washer and access the lid switch as shown in the image below. You can use the procedure shown at the bottom of that image to place an insulated jumper wire in the harness of the lid switch to see if the motor will run in the drain and spin mode with this switch bypassed. The wire colors going to the lid switch on your washer will be different (probably tan and gray). The basic procedure is the same.

If the washer runs in the spin mode with this switch bypassed then the lid switch will definitely need to be replaced. You can order a new lid switch from the Sears PartsDirect website. The part number for the lid switch is 3949238. Here is a direct link for that part: Lid switch .

If the washer still won't spin with the lid switch bypassed, you could have a problem with the timer, the motor or the wiring between components.

If you need more help, reply with additional details and we will assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
December 18, 2010
Q:

kenmore washing machine wont drain water

A:

If the motor will not run in the drain and spin mode, then you could have a problem with the lid switch. The previous answer that Marc posted in the above response refers to this answer regarding a lid switch problem in your type of washer: Kenmore top load washer won't drain. Unplug the washer and check that lid switch as shown in that answer. That may help you resolve a problem where the motor won't run the drain and spin mode.

 

You can order parts from this page: Kenmore Washer Model 110.22442100 Repair Parts. Unplug the washer before accessing internal components and replacing parts. 

 

If the washer motor runs in the drain and spin mode then you could have a problem with the drain pump or the drain path. Check the washer drain. Check the drain hose for a kink or clog. You may need to remove the cabinet (with the washer unplugged) and check the drain pump for a clog or for damage. Reply with additional details if you need help with that task. 

 

The problem with the washer not filling properly could be caused by a wiring failure. You can unplug the washer and check the wiring connections on the timer and the water level pressure switch. Check the wiring connections on the inlet water fill valve assembly. If those wiring connections are okay, then you may have a problem with the water level pressure switch or the inlet water valves. It is unusual that you have this fill problem after removing water from the washer. Reply with additional details if you need more assistance with this failure.

 

 

If you get to the point where you need to have a service technician examine and repair the washer, you can schedule service through this link: Sears Home Services Washer Repair. 

Read More
Lyle W -
Sears Technician
March 28, 2013

Recommended maintenance parts & accessories

Show 3 more
No more item to show