Model #110-130 Century welder

  • 100 Amp Welder
    3 Results

Question and Answers

Q:

Kenmore Oasis Electric Dryer- start button not working.

A:

Thank you for your question and I understand your concern. If the control panel can be programmed and the dryer won't start, the failure could be a faulty thermal fuse or it could have a broken belt. If the belt happens to break or come off, the dryer will not start.

The thermal fuse is located on blower housing. The thermal fuse can be disconnected and tested for continuity with an ohm meter.

I added an image below that should help access and test the thermal fuse. NOTE: Disconnect the power cord from the power source before servicing.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

The thermal fuse can be ordered from Sears PartsDirect

Read More
Joey S -
Sears Technician
January 07, 2011
Q:

The console on my Proform xp 130 is not working. What should I do?

A:

I am sorry to tell you, the wiring harnesses are most likely not causing the console to not display or function.

If you can access the 2 wiring harnesses, try moving them in and out and making them slide up and down inside the upright.

Be sure the batteries are properly positioned inside the console. If you don't change anything by doing this, I think you will need a new console.

It would be best to get someone to test the voltage from the batteries before buying a console.

Read More
Jimmy K -
Sears Technician
March 16, 2010
Q:

Please help. What can I do with a delivered elliptical without an instruction manual and no electrical cord?

A:

The elliptical does not have a power cord. It is powered by 4 d-cell batteries. You need to get the owners manual and it will explain everything to you. To get an owners manual go to [www.managemylife.com]. Go to the find manuals section on the home page and enter your information as shown below.

Brand Proform

Model 831.28544

Read More
Jimmy K -
Sears Technician