Model #11067032600 KENMORE ELITE Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers


dryer wont power up 11067032600 Kenmore Elite Dryer


Thank you for your inquiry on your Kenmore Dryer, Model: 110.67032600. From reviewing the details on your model, the first thing that should be checked and confirmed is the voltage supply where it connects to the back of the dryer. The voltage must measure 220-240 volts when measuring across the two outside terminals and 110-120 volts when measuring across the center terminal to each outside terminal. If the voltage supply has been checked and verified then disconnect the power cord and remove the rear panel. There is a thermal fuse located on the blower housing which can fail and prevent it from starting. 

Safety Warning: Before beginning the repair, disconnect the direct power supply to the dryer to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663.


I hope this answered your question. Thank you for contacting, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
May 15, 2015

Idler wheel Part #8576626 (#24 on diagram) 11067032600 Kenmore Elite Dryer


Thank you for choosing Sears Parts Direct. I will be happy to help with your dryer. Upon researching model 11067032600; key number 24 is the fly wheel. Key number 13 is the idler wheel. Some fly wheels act as a balancer and can affect the motor if removed or damaged. I recommend opening the unit and comparing the parts inside to the parts in the diagram.

Thank you for choosing Sears. We appreciate your business. Have a great day.    

Read More
Jeff Wallace Jr -
Sears Technician
March 31, 2015

How to retrieve moisture sensor connector 11067032600 Kenmore Elite Dryer


Thank you for choosing and being a valued member. I can certainly assist you in locating the disassembly instructions for your dryer. 

Access the moisture sensor wires by removing the front panel. 

1. Unplug dryer or disconnect power.

2. Remove three screws from the rear of the

console assembly. Pull console towards

front of dryer to hinge open and/or

remove console.

Removing the Machine Control


3. Remove the wire connections to the

machine control assembly.

4. Remove the one screw holding the

machine control assembly to the

metal bracket. 

5. Push in on the tab located on the back

of the machine control to slide it off

the bracket.

Removing the Motor Control

Electronics (Dual Motor Models)

3. Remove the wire connections to the

motor control assembly.

4. Remove the two screws holding the

motor control electronics assembly to

the dryer top.

Removing the User Interface


3. Remove the wire connections from the

user interface assembly, including the

P5 ribbon cable. 

4. Remove the cycle selector knob from

the front of the console by firmly

pulling on it or carefully prying straight


5. The user interface assembly is held to

the console insert panel by three

screws and two locking tabs. After the

screws are removed, lift each of the

locking tabs to remove the back cover

of the user interface assembly. 

6. Remove the cycle selector switch from

the user interface assembly opening

by lifting the locking tab on the cycle

selector switch and turning the

selector switch in a counterclockwise


7. Locking tabs located at the bottom of

the console insert panel secure the

user interface assembly to the console

insert panel. Using a flat-blade

screwdriver, gently apply pressure to

the locking tabs to release the user

interface assembly.

I have also attached the wiring diagram for the moisture sensor. 

You can also visit for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
January 22, 2015

Top Parts